Sri Lakshmi Electricals

Turbine oil Filtration carried out by our well trained persons in work force. We separate out the water content fully and removes
sediments, Foreign Particles, Dirt from oil in Micron level(NAS) and reduces the moisture too in oil.

Features:

• Strong technical background and enriched experience
• Higher Dirt Holding Capacity
• Our system doesn't remove any additives from oil
• Our system doesn't affect of being moisture present in oil for getting desired NAS level
• Low time consumption because of High Flow Rate

* Why Oil color Changes? Does that mean it must be
changed immediately?

Changing of Oil leads to increase in the investment. So better you proceed for oil filtration to increase the lifetime of oil. The two most common causes of oil darkening are thermal stress and oxidation. While oxidation, the chemical union of oil and oxygen, is a common reason that oil stability is reduced, the amount of color change is not a good indication of the level of oxidation. The presence of metal catalyst particles, heat, oxygen and water all contribute to oil oxidation. As the acid level increases, corrosion of components will become more likely. Viscosity will increase as soluble contaminants mix with the oil. This will leave sludge, varnish and tar deposits as a thin, insoluble film throughout the system’s internal surfaces.

All of these can be reduced through a well-planned Oil Filtration Service. We are Giving the Best Filtration Service.

• Doesn't have the causes like Clogging, Pressure Losses etc.,
• Increase the Oil life time
• Safe guard to Servo Valve, Pump and full Controlled Hydraulic Systems
• Total client contentment
• Achievement of Cleanliness in terms of NAS
• Best in quality

• For instance, a new hydraulic fluid can contain 500,000 particles per 100 ml that are 5 µm or larger
• Unfortunately, 0.5 µm particles can be harmful to most systems
• MIL-H- 5606F requires that in 100 ml of fluid there be no more than 10,000 particles ranging between five to 15 µm
• No more than 1,000 particles between 16 to 25 µm, and no more than five particles over 100 µm

With the use of latest technology, we are offering quality approved Quenching Oil Filtration. In this procedure, we remove water and contaminants from the quench oil and improve its quality which saves money at the same time. Our experts undergo this Quenching Oil Filtration by following all the entire quality standards.

Features:

• Removes heavy sludge from oil
• Removes the Dirts & Carbon content in Micron Level
• Improve the lifetime of quench
• High performance

CUTTING OIL

What is the primary use for cutting oils?

Cutting oils are primarily used as a lubricant in the interface between the chips and the tool’s cutting edge, reducing process friction and aiding in chip flow. Cutting oils are also employed as a cooling agent to remove any process-generated heat, as they increase the rate of heat flow from the machining process.

This lubrication and cooling improves the surface finish of the machined work; however, contamination in the form of water, particulate, metal shavings, or tramp oil builds up over time and will compromise the finishing quality of the cutting oil.

Problems Faced with your cutting oil:

• Unacceptable processed part
• Excess chips in the "cutting zone"
• Increased process friction
• Elevation in process temperature
SLE competence Standard

Particulate contamination does not mean that the cutting oil must be disposed of and replaced. Through our Filtration system we removes the particulate from the cutting oil, and thus extends the fluid’s life.

We removes both fine and gross contamination, which will improve finish quality by reducing part-cracking , distortions, and process friction.

• High operational fluency
• Removes impurities from oil
• Rendered by best technicians

• Well executed
• Eliminate trouble shooting in pumping systems
• Timely completion

• High quality service
• Complete satisfaction of customers
• Cost effective

• Ensures Super Clean Oil to NAS 4 - NAS 5 ( New Oil NAS 8 )
• Ensures Moisture free oil which minimizes oxidation in Oils.
• Increases Oil Life indefinitely
• Drastic amount of money is saved
• conservation of oil, which is mostly imported & thus save lot of foreign currency

• Executed by experts
• Total client contentment
• Cost effective

• Easy to execute
• Timely executed
• Comes in budget

• Affordable
• Decrease the downtime of transformers
• Timely completed